Peak and Off-Peak Electricity Hours: When They Are and What They Cost

By , ElectricityUsageCalculator.com

Peak electricity hours are when your utility charges the most per kWh, usually weekday afternoons and evenings. Off-peak is overnight and, on many plans, weekends.

The exact window is set by your utility, and the prices only apply on a time-of-use plan. Below: the peak windows at seven large U.S. utilities, how much more a peak kWh costs, and how to find yours. Two companion pages go deeper: how time-of-use rates work and whether switching pays, and what running appliances at night actually saves.

What peak and off-peak hours mean, and who they apply to

A utility's cost to deliver a kilowatt-hour is not the same all day. When nearly every home in its territory is running air conditioning at 5 pm, it has to buy or generate the most expensive power on the system and push it through wires that are already near their limit. At 3 am the same kWh is cheap. Peak and off-peak hours are the utility's way of putting that difference on your bill: a higher price per kWh during the hours of highest demand (on-peak), a lower price the rest of the time (off-peak), and sometimes a middle tier (mid-peak, partial-peak or shoulder) in between.

The part most people miss is that these hours only matter if your rate plan uses them. On a standard flat rate, every kWh costs the same whether you use it at noon or midnight, and shifting your laundry to 11 pm saves nothing. Peak pricing applies when you are on a time-of-use (TOU) plan, a time-of-day plan, an EV plan, or one of the real-time or critical-peak variants. In 2023 roughly 11% of all U.S. electric customers were enrolled in some kind of dynamic pricing program, according to the Federal Energy Regulatory Commission's 2025 Assessment of Demand Response and Advanced Metering, which also counted 128.4 million smart meters in operation, 76.8% of all meters. The smart meter is what makes hourly pricing possible, so the share of households on these plans keeps growing: enrollment rose 16.9% from 2022 to 2023, Xcel Energy moved its Colorado residential customers to a time-of-use default between 2022 and 2025, and California's regulator made default time-of-use pricing the end state of its residential rate reform.

Quick check: if your bill shows one price per kWh (or a tiered price that depends only on how much you used), you are on a flat or tiered rate and peak hours do not change what you pay. If it shows separate on-peak and off-peak kWh, or a plan name with "time-of-use", "TOU", "time of day" or "nights and weekends" in it, the windows below decide what you pay.

When are peak electricity hours? Seven utilities compared

There is no national peak window. Each utility sets its own, and the same utility often runs a different schedule in summer and winter. The table pulls the on-peak hours straight from seven utilities' own rate pages or their state regulator, checked November 2026. Together they cover a large share of U.S. homes on time-based pricing.

On-peak hours at seven U.S. utilities
Utility (plan)On-peak hoursDaysSeason rule
Southern California Edison (TOU-D-4-9PM)4 pm to 9 pmWeekdays on-peak; weekends mid-peak in the same windowSummer is June to September. In winter (October to May) the 4 to 9 pm block drops to mid-peak and 8 am to 4 pm becomes super-off-peak.
Pacific Gas & Electric (E-TOU-C)4 pm to 9 pmEvery day, weekends includedSummer June 1 to September 30, winter October 1 to May 31, with different prices in each.
APS, Arizona (Time-of-Use 4pm-7pm Weekdays)4 pm to 7 pmWeekdays only; weekends and twelve listed holidays are off-peakSummer is May to October bills, winter November to April. Winter adds a super-off-peak block from 10 am to 3 pm on weekdays.
Xcel Energy, Colorado (residential TOU, the default plan)5 pm to 9 pmNon-holiday weekdays; weekends and holidays are off-peakSame hours year-round since November 1, 2025. Summer (June to September) prices are higher than non-summer.
Georgia Power (Nights & Weekends)2 pm to 7 pmWeekdays, excluding July 4 and Labor DayOn-peak pricing exists only June through September. The rest of the year every hour is off-peak.
Con Edison, New York (residential TOU)8 am to midnightEvery dayOff-peak is midnight to 8 am all year. June through September adds a super-peak from 2 to 6 pm on weekdays.
ComEd, Illinois (Time-of-Day Pricing)1 pm to 7 pm (Mid-Day Peak)Every day (CUB explainer)Four periods year-round: Morning 6 am to 1 pm, Mid-Day Peak 1 to 7 pm, Evening 7 to 9 pm, Overnight 9 pm to 6 am (cheapest).

Three patterns show up. First, the expensive block almost always starts in the early or mid afternoon and ends between 7 and 9 pm; nobody charges peak prices at 3 am. Second, weekends are cheaper on most of these plans: APS, Xcel and Georgia Power price every weekend hour off-peak and SCE drops to mid-peak, while PG&E, ComEd and Con Edison run the same schedule seven days a week. Third, most of the price difference is in summer: Georgia Power has no peak pricing at all from October to May, Con Edison's super-peak and Xcel's higher prices exist only in summer, and APS and SCE both add cheap midday blocks in winter. If your utility is not in the table, its own rate page will state the hours; the section below shows where to look.

When are off-peak hours?

Off-peak is simply every hour the utility has not labeled on-peak or mid-peak, so it is a bigger block than most people picture. Count the hours in the table above: APS's 4 to 7 pm weekday window is 15 of the 168 hours in a week, about 9%; Xcel's 5 to 9 pm weekday block is 20 hours, about 12%; the common 4 to 9 pm weekday window is 25 hours, or 15%. Everything else, about 85% to 91% of the week, is off-peak. The outlier is Con Edison, whose 8 am to midnight peak covers two-thirds of every day and leaves only the eight overnight hours cheap.

The reliable off-peak hours, across every schedule in the table, are overnight: from the end of the evening peak (7, 8 or 9 pm) until 6 to 8 am, plus all weekend at APS, Xcel and Georgia Power and most weekend hours at SCE and PG&E. A newer twist is the midday "super-off-peak" block in states with a lot of solar. SCE prices 8 am to 4 pm in winter below its overnight rate, and APS's winter super-off-peak runs 10 am to 3 pm on weekdays at 3.495 cents per kWh, less than a third of its regular off-peak price. In those territories the cheapest time to run a dishwasher in January is lunchtime, not midnight. Is electricity cheaper at night? works through what that means appliance by appliance.

Why electricity costs more in the late afternoon

Peak windows track the shape of total demand on the grid. The U.S. Energy Information Administration's analysis of hourly load, Hourly electricity consumption varies throughout the day and across seasons, found that demand is highest in summer, when it builds through the afternoon and reaches its daily maximum around 5 or 6 pm as air conditioners run hardest and people arrive home. Winter demand is flatter but has two humps, one in the morning and one in the evening. The daily low lands around 5 am, and weekends and holidays run lower than weekdays. Lay those facts over the table above and the windows make sense: a 4 to 9 pm weekday peak brackets the summer maximum, Con Edison's long peak reflects a dense city that stays busy all day, and Georgia Power only bothers with peak pricing in the four months when afternoon air conditioning sets the system's annual record.

Solar is reshaping the curve, and the peak windows with it. EIA's June 2026 analysis of the New York grid, Metered electricity demand in the New York ISO falls midday because of small-scale solar, found that rooftop systems now erase so much midday demand that the metered load between 4 and 7 pm, when the sun fades and homes light up, climbed by an average of 2,221 MW in spring 2026 compared with 681 MW over the same hours in 2018. A steeper evening ramp is harder and more expensive to serve, which is why so many utilities have moved their peak later into the evening and started pricing midday as the cheapest part of the day. Expect more schedules to look like SCE's and APS's winter plans over the next few years.

How much more a peak kWh costs

The spread between on-peak and off-peak prices is the number that decides whether timing matters to your wallet. The Brattle Group's 2023 survey of U.S. time-varying rates, Time-Varying Rates Are Moving from the Periphery to the Mainstream, found that in 85% of two-period TOU rates the peak price is at least twice the off-peak price, with a mean ratio of about 3 to 1. The live prices below, in cents per kWh and before fixed charges, taxes and riders, show how that plays out at five utilities.

On-peak and off-peak prices at five utilities, cents per kWh
Utility and seasonOn-peakOff-peakGap per kWhRatio
Xcel Colorado, summer (energy charge)21.28¢7.88¢13.4¢2.7x
Xcel Colorado, October to May18.33¢6.79¢11.5¢2.7x
APS Arizona, summer (May to October)34.40¢12.35¢22.1¢2.8x
Georgia Power Nights & Weekends, June to September30.3¢7.8¢22.5¢3.9x
Con Edison, summer (supply portion only)27.86¢5.22¢22.6¢5.3x
SCE TOU-D-4-9PM, summer weekday (before baseline credit)59¢33¢26¢1.8x

Two things to notice. The ratio tells you how much timing matters in percentage terms, but the gap in cents is what you actually save per kWh moved, and SCE's "low" 1.8x ratio still produces the biggest gap in the table because California's prices are high across the board. And the off-peak price on a TOU plan is often far below what a flat-rate customer pays: Xcel's 7.88 cents and Georgia Power's 7.8 cents are less than half of the 18.23 cents per kWh EIA forecast as the national residential average this winter in its Winter Fuels Outlook. So a household that keeps most of its use off-peak can pay less per kWh overall than it did on a flat rate. The risk is the peak price, which is why the decision deserves a real calculation; the time-of-use rates guide walks through one with your own numbers.

What peak pricing does to one appliance

Take a 3,000-watt electric clothes dryer, the midpoint of the 1,800 to 5,000 watt range on our dryer electricity guide, running a one-hour load. That is 3 kWh. On Xcel's summer schedule the load costs 3 × 21.28¢ = about 64 cents if it runs at 6 pm on a Tuesday, and 3 × 7.88¢ = about 24 cents if it runs at 9:30 pm or any time Saturday. Same clothes, same dryer, 40 cents apart. On APS's summer prices the same shift saves about 66 cents a load, and on Georgia Power's about 68 cents.

Multiply that by the things in a house that can wait, and the pattern that emerges is that a few big, movable loads carry nearly all the savings: the dryer, the dishwasher's heated-dry cycle, pool pumps, electric water heating and above all EV charging, where a single home charging session can be 25 kWh or more. Lights, the refrigerator and the TV you are watching at 7 pm cannot move, and they are too small to matter. The night and off-peak savings page puts a per-load figure on each of these, and the electricity usage and cost calculator will do it for any appliance with your own wattage, hours and rate.

How to find your own peak hours

  1. Read the plan name on your bill. Look for "TOU", "time-of-use", "time-of-day", "nights and weekends", "EV" or "peak" in the rate schedule line. No such wording and a single price per kWh means you are on a flat or tiered rate and can stop here (or read about whether switching to a TOU plan would pay).
  2. Check the usage section. TOU bills split your kWh into on-peak, off-peak and sometimes mid-peak lines, each with its own price. The ratio of those lines is your current peak share, the single most useful number for the switching decision. If your bill jumped after a plan change, the why is my electric bill so high checklist shows how to tell a price change from a usage change.
  3. Pull the schedule from the utility's rate page. Search the utility's name plus the plan name, or the term "rate schedule". The page or tariff PDF will state the hours, which days count as weekends, the holiday list and the season boundaries. Note the season dates: they are not the same as the calendar seasons, and APS's "summer" starts in May while SCE's starts in June.
  4. Confirm with your meter data. Most utilities with smart meters offer hourly or 15-minute usage in the online account. Download a recent month and add up the kWh that fell inside the peak window. That is the number to plug into our kWh cost calculator at the peak price and the off-peak price to see what the plan is costing you.
  5. Watch for changes. Peak windows move. Xcel Colorado changed its hours on November 1, 2025, and Con Edison kept older customers on the hours they enrolled with. Utilities announce these on bill inserts and rate pages, usually a few months ahead.

Cedrick Reese compiled this guide for ElectricityUsageCalculator.com from the utilities' own rate pages and regulator filings rather than from third-party summaries: every peak window and price in the two tables links to the utility or public utility commission page it came from, and the demand-curve explanation rests on two EIA analyses and the Brattle Group's survey of time-varying rates. Prices are quoted in cents per kWh before fixed charges, riders and taxes, so they will not match a bill total. Utility prices and hours are rechecked against the linked rate pages each spring and fall, and whenever a utility announces new prices. The 18.23 cent national average comes from EIA's October 2026 Winter Fuels Outlook and is updated each October. Last checked November 2026.

Frequently asked questions

Are weekends peak hours for electricity?

It depends on the plan. APS, Xcel Colorado and Georgia Power treat every weekend hour as off-peak. Southern California Edison charges a mid-peak price from 4 to 9 pm on summer weekends, PG&E's E-TOU-C and ComEd's Time-of-Day apply the same periods every day, and Con Edison's 8 am to midnight peak runs seven days a week, with only its summer super-peak limited to weekdays. Check your own plan's rate page.

Do peak hours apply if I am on a regular flat rate?

No. On a flat or tiered rate the price per kWh is the same at every hour, so when you use electricity does not change your bill. Peak and off-peak prices only apply on time-of-use and similar time-based plans. About 11% of U.S. electric customers were on some form of dynamic pricing in 2023, per FERC, so most households still pay a flat price.

What is the cheapest time of day to use electricity?

On most time-of-use plans, overnight: the off-peak block typically starts between 7 and 9 pm and runs to 6 to 8 am, and grid demand bottoms out around 5 am according to EIA. In solar-heavy territories the cheapest block can be midday instead: APS prices 10 am to 3 pm on winter weekdays at 3.495 cents per kWh, and SCE's winter super-off-peak runs 8 am to 4 pm. On a flat rate there is no cheapest time.

Do peak hours change in winter?

Often. Georgia Power's Nights & Weekends plan has no on-peak hours at all from October through May. SCE's 4 to 9 pm block drops from on-peak to mid-peak in winter and a midday super-off-peak appears. APS keeps its 4 to 7 pm peak year-round but adds a winter midday super-off-peak. Xcel Colorado keeps the same 5 to 9 pm hours all year and changes only the prices. The season boundaries are set by the utility and rarely match the calendar.

How much more does electricity cost during peak hours?

Typically two to three times the off-peak price. Brattle found that 85% of two-period TOU rates have a peak price at least double the off-peak price, with a mean ratio near 3 to 1. Live examples range from Xcel Colorado's 2.7x (21.28 vs 7.88 cents in summer) to Con Edison's 5.3x on the supply portion of the bill (27.86 vs 5.22 cents). In cents, the gap runs from about 11 to 26 cents per kWh at the utilities in this guide.

Sources

Prices on this page are the utilities' published energy charges in cents per kWh and exclude fixed monthly charges, delivery riders and taxes. They are examples for comparing plan structures, not a quote for your service. Use your own bill and the linked calculators for a personal estimate.